The process:
1. Choose your stone: there are hundreds of different types of granite all with different colours and markings. There are also many different engineered or composite stones. We can help guide you in your choice so that your worktop not only complements but enhances the chosen look for your kitchen.
2. Once you have selected the type of stone you require, it is best to go to the stone mason's showroom to select the actual slab that will be used for your worktop, as granite varies in shade and marking from piece to piece depending on which part of the quarry it came from.
3. Piermont will prepare the site properly & get ready for templating: the key to beautiful, long lasting stone surfaces is a perfect preparation of the site. We will measure up and make templates. The kitchen units need to be in place with any temporary worktops which will be removed before we template and any sinks, taps, hobs etc.. need to be on hand so that we can ensure that they are properly marked on the template. Undermounted sinks will be set into and fully supported in the carcass.
4. Installation: it takes us just 5 working days from templating to installation on site. We have our own team of installers who will ensure that the job is done correctly and with the minimum of disruption.
5. Stone is porous and can stain if liquid or acid is spilt onto it. We seal the tops in the factory and provide a care kit. It is important that you follow the instructions within it and maintain the sealer for best protection.
Things to bear in mind
1. Variations in shade and markings: granite can vary considerably from piece to piece and even within the same slab. We recommend that you come with us to the stone mason's and choose the actual slab that will be used for your kitchen to ensure that you are happy with it. If you require something more uniform in look, then composite or engineered stone is probably more suited to your needs.
2. Fissures and pits: when the stone is formed, small cracks and bubbles can occur within it. Where necessary, these will be filled by us before the worktop leaves the factory.
3. Joints: we always minimise the number of joints in a worktop, but there will be times when size, access and installation considerations will determine the maximum size of the pieces that we produce. The joints will be close to invisible once the pieces are in situ. |
